This step only works if you are the original purchaser of the safe and you previously registered the safe with Sentry. Sentry then supplies you with the combination to the dial safe. Enter: User ID Number (3-7) New User Code New User Code, before the orange light disappears.
The set light will stay orange for ten (10) seconds. You will also need to produce the model number and the serial number for the safe, located on the lower right hand corner of the front door. (Code length: 1 to 10 digit code) Always perform this operation with the door open. You'll need to provide Sentry with some key information, including your name, address and phone number. Mail or fax Sentry to request the combination to your dial safe if you have lost the numbers. Turn the knob around once to the right and stop at the final number to the combination. Spin the knob around twice to the left and stop at the second number in the combination. Stop on the first number in the combination. Spin the knob around at least twice to the right. Start by positioning the 0 on the knob at the indicated line on the dial's ring.
Other types of Sentry keypad safes require you to enter the combination and then press a green button.ĭial in the correct numbers on a Sentry dial combination safe. On most Sentry digital keypad safes, begin by entering the "star" key, then your combination, then the # button. Look for the small square plastic cap next to the touch pad, you will see a cap, open the cap, you will see two prongs to fit the 9volt square battery. Use the combination to the safe, provided you still have the numbers. Answer (1 of 15): If your 4-AA-battery pack is dead inside your Sentry safe, you could use a 9volt battery to open it from outside.
0 kommentar(er)
